| Subject | Text |
| Toshibas and the like | Hi there Larry and Tibor,
last night I repaired my Toshiba. Larry, you are completely right, the |
| [quote:3cf615a78f="Frank"]You can get the STK392 110 at electronix on line for 6.00 bucks a piece |
|
|
| supply power is flashing | But i can see that THt working :a faint light flashing also on screen .when connecting all voltages |
| A very direct answer to your query is that the specifications printed on the power supply by the man |
| 120 Volts TX | Frank, What is your mains voltage in your country ? ( 110, 220 ?)
If you put 220 Volts on a 120 V |
| zener diode IDin battery pack over-charge protection circuit | I recently repacked a Panasonic Nicad drill battery pack (model Ey9106). In the process of doing so |
| Forgot to say R629 should be 2.7ohm for 90 degree crt, 27 ohm for 110 degree crt, |
| I NEED YOUR HELP!!! | I looking for shema (washing machine):
PRIVILEG 110 SC
series
974/107 16
PLEASE HELP ME |
| Accenture - JUST SUBMIT RESUME [JOBS UPDATED] | [quote:2054a8af32][b:2054a8af32]Job Title: Building and Office Maintenance[/b:2054a8af32]
[b:2054 |
| http://www.partstore.com/Model/Sanyo/Sanyo/DP32746.aspx
Looks correct to me...
[quote:82ecf9339e |
| I suppose that this transistor is located on the primary side of the power supply and that you are m |
| Unlock code for BOSCH | Hi,
I bought second hand Opel corsa, but seller didn't provide me code for radio, so if somebody ca |
| Re: Code for car 400 & cdr500 | [quote:8f0deba9be="forceboot"]Hello
Needs codes to tree radios .
I do not know which is working , |
| Did i blow my 220Volt recharger?? | Does any one know if i plug my 220 volt rated charger into a 110 voltage outlet if i will damage the |
| rewinding MOT not working out..... | hi again,
well it is the same with my analog meter, about .5 volts with 10 turns. the resistance |
| Is this normal appearance for and amplifier IC?? | I'm in uncharted territory (for me, anyway). I'm a radio tech--and don't find much in a CB I can't |
| MOV | Looks like a Metal Oxide Varistor or MOV device to me too.
These are usually near the powersupply |
|
|
| switch check | at first check the power source is 110 or 220 v, if OK make sure power is off and set the VOM to buz |
| no horiz. investel tv | 110 v is normal .transistor bu 808 is ok.i scope signal is normal when disconnecting output of stv22 |
| Take the value of the resistor - add 10% and subtract 10%. If the value you read falls within this r |
| schema elettrico | Salve a tutti il televisore segnalato come in username avendo diversi difetti vorrei potervi porre r |
| The conversion of Amps to Watts is governed by the equation Watts = Amps x Volts
For example 1 am |
| Re: need code please | [quote:97aedc0f9f="imtiazrwd16"]MERCEDES-BENZ
BECKER AUTOMOTIVE
MODEL NO.BE 6053
SERIAL NO.682054 |
| CD startup | Hi, exact sequence with a CD is as follows. Power up, Splash screen on video. Open command. Open a |
| JVC TV AV-21FMG3B , Excessive Voltage On HOT & burn the | I have a JVC Tv MOdel , AV-21FMG3B, there is an excessive voltage ( 180V) on the collector of HOT &a |
| re; toshibas | Hey guys, your english is great as far as I`m concerned, One thing
I forgot to mention is the color |
| You can get the STK392 110 at electronix on line for 6.00 bucks a piece. |
| 2000 | yes 220 is good and 110 v good too no switching involved |
| onkyo tx-8211 | change the main voltage from 110 to 220 for USA model |
| Frank, What is your mains voltage in your country ? ( 110, 220 ?)
If you put 220 Volts on a 120 |